butées à billes

Contacter maintenant

A ball thrust bearing is a particular type of rotary ball bearing. Like other ball bearings, they permit rotation between parts, but they are designed to support a high axial load while doing this (parallel to the shaft). Higher speed applications require oil lubrication. Generally, they are composed of two washers (raceways) which may be grooved the rolling balls elements which are typically caged. As opposed to roller thrust bearings, ball thrust bearings can generally operate at higher speeds but at lower loads.
Some important factors when selecting thrust bearings from us:
Thrust bearings must be kept in matched sets.The bore (d dimensions) of one washer (smaller) in the set will conform to the specifications.The bore (d dimension) of the mating washer will be ~ .007” larger because it is a clearance hole for the shaft.

35 mm x 73 mm x 9 mm ISB 54209 U 209 butées à billes

40BER20XV1V 0,231 Kg
NSK 35 200 r/min

120 mm x 250 mm x 40 mm NSK 52424X butées à billes

140 ISO
400 400x540x140

ISB 53207 U 207 butées à billes

125 6918
90x125x18 18

NTN 562010/GNP5 butées à billes

25 ° 60
24,5 mm 130 mm

170 mm x 310 mm x 52 mm SKF NJ 234 ECML butées à billes

13,34 Kg 7032 A-UX
252 kN 160 mm

ISB NK.22.1000.100-1PPN butées à billes

70 80x130x70
80FSF130 80 mm

150 mm x 210 mm x 18 mm KOYO 239430B butées à billes

BK142216 14
16 mm 14 mm

AST 51164M butées à billes

0,083 kg / Weight, s 35
3900 N / Fatigue li 56 mm

FAG 51232-MP butées à billes

150 °C SNR
42,000 mm 15x42x13

Toyana 234416 MSP butées à billes

2 mm 26
1.73 Kg 7021B

ISB 234960 butées à billes

77,2 mm 69 mm
2,55 Kg 6300 r/min

NACHI 51222 butées à billes

29,007 mm 2,3 mm
114 478R/472AR
1/12