roulements à billes à contact oblique

Contacter maintenant

Angular Contact Ball Bearings designed to meet OE manufacturers' demanding requirements. These bearings have a contact angle that enables them to withstand significant axial loads in one direction together with radial loads. They are generally used in pairs, triplex sets, quadruplex sets, or multiplex sets since an axial component is generated when a radial load is applied.Single-row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet metal or brass cages. The raceways of the inner and outer rings are offset from each other along the bearing axis. The bearings are available in open and sealed designs. Their angular adjustment facility is very limited.Double-row angular contact ball bearings can support axial loads in both directions and high radial loads. They are particularly suitable for bearing arrangements in which rigid axial guidance is required.

35 mm x 72 mm x 17 mm FAG 7207-B-TVP roulements à billes à contact oblique

120x240x160 240 mm
24NJ/NJP2480 160 mm

NTN HUB214-9 roulements à billes à contact oblique

340 mm 2.5 mm
445 mm 460

Toyana 7004 B-UX roulements à billes à contact oblique

35,25 90 mm
35,25 mm 90

17 mm x 47 mm x 14 mm NSK 7303BEA roulements à billes à contact oblique

114 mm 1630 kN
7 mm 4 mm

260 mm x 400 mm x 65 mm SKF 7052BGM roulements à billes à contact oblique

- 0.019 Kg
Needle Non Thrust Ro Open

80 mm x 140 mm x 26 mm SKF 7216 BECBJ roulements à billes à contact oblique

34 100
180 mm N220

Toyana 7207 B-UD roulements à billes à contact oblique

44,6 mm 5 mm
20 -20 °C

15 mm x 35 mm x 11 mm CYSD 7202CDB roulements à billes à contact oblique

240 mm 240
5,09 Kg 25 °
1/12